Angular Contact Bearings

Contact Now

Single row angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.

Double row angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. NTN’s 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.

Permco W58-34 Angular Contact Bearings

45 mm E32909J
0.6 mm 15

70 mm x 125 mm x 24 mm Rollway 7214 BM Angular Contact Bearings

118 mm 420
118 118 mm

General 455610 Angular Contact Bearings

Needle Non Thrust Ro Needle
Open 31171512

FAG 7213-B-TVP-UO Angular Contact Bearings

Round 8483.20.40.80
Four-Bolt Round 2800 r/min

FAG 3316-C3 Angular Contact Bearings

16.058 / 15.99 AST40 1620
0.300 18.000

PEER 5212 Angular Contact Bearings

30 28,75 mm
23 mm NTN

FAG 7313-B-TVP-UO Angular Contact Bearings

Ball Bearing No
0.41 0.38 kN

90 mm x 190 mm x 73 mm FAG 3318 Angular Contact Bearings

110 mm 32
75 77 mm

95 mm x 170 mm x 55,6 mm FAG 3219-M Angular Contact Bearings

85 15
48 mm 85 mm

FAG 3308-BD-2HRS Angular Contact Bearings

SNR 45 mm
72 72 mm

FAG 4308B.TVH Angular Contact Bearings

NU238 55
55 mm 340 mm
1/19